Couple of EAP 245 and EAP 225-outdoor

2021.12.01 02:34 inezk Couple of EAP 245 and EAP 225-outdoor

Hi,
I have very mixed network now - I have Ubiquiti lite ac upstairs, then I have Teltonika RUT-950 downstairs and EAP 225-outdoor outside.
Teltonika RUT-950 is the main access point and router, it started breaking (I think it overheats) so I'm thinking of redoing my network.
I'm essentially split between so many choices, but Omada devices look interesting to me as they are easy to buy (very available) and have some good options regarding wall units. However what I miss is good looking TV table top unit - so my question is - is anyone using EAP 245 in that fashion? Does it work well?
Also any comparison between EAP 245 and any of the wall units?
Given that I also have that one Ubiquiti I'm also thinking maybe I should go with Ubi... dunno, there is just so much choice, and fact that Omada devices are pretty ugly does not help.
Also what people are thinking of EAP 245 given that it does not have WiFi6?
submitted by inezk to TPLink_Omada [link] [comments]


2021.12.01 02:34 vanillapudding19 mom and daughter, now & then

mom and daughter, now & then submitted by vanillapudding19 to CalicoKittys [link] [comments]


2021.12.01 02:34 johnson9232 DRS only the shares YOU want to OWN. Any share held in your brokerage account is NOT OWNED BY YOU!

DRS is the only way to actually be the owner of the shares THAT YOU PAID FOR. Idk about you guys but I don’t like to take unnecessary risks with my money, and I don’t want to end up making a donation to some brokerage. I didn’t realized people have not been DRS’n 100% of their* shares, it seems like people are scared of a new platform. Computershare is intuitive and easy to use. DRS all of them, fuck the corruption, let’s get paid
Adding this text to make it long enough so I can actually post this post without auto mod taking it down.
If there’s anyone/anything you can trust during this whole saga, it is…
RC, DFV, DRS and DeFi
Just a little more text to make sure it’s long enough because I simply don’t want to type all this out again.
Don’t forget the facts. Read the writing on the wall. Hedgies R Fooookn foookd
https://youtu.be/f4Mc-NYPHaQ
submitted by johnson9232 to GME [link] [comments]


2021.12.01 02:34 Kiwi_Force Prime Minister Jacinda Ardern announces New Zealand military and police personnel to join growing coalition of nations present in The Solomon Islands after days of violence and rioting

submitted by Kiwi_Force to worldnews [link] [comments]


2021.12.01 02:34 GODwOROSEOSTic 🍣Baby Sushi - Gem X100 🍣 | Stealth Launched 10 Minutes 🚀 | LP Locked 🔒 | 🔥 Small MC 🔥 | Marketing More Later Today! | Great Community

🍣Baby Sushi - Gem X100 🍣 | Stealth Launched 10 Minutes 🚀 | LP Locked 🔒 | 🔥 Small MC 🔥 | Marketing More Later Today! | Great Community

🌐 Telegram: https://t.me/BaSushiBsc

🍣 Contract : 0xf74f5c17347fd305c8dcdce70ca9e3621c588b39

🍣 Buy : https://exchange.pancakeswap.finance/#/swap?outputCurrency=0xf74f5c17347fd305c8dcdce70ca9e3621c588b39

🍣 At the start of the plans are to grow a very strong and stable community through the use of Telegram and Reddit. Some paid promotion is in the works and hopefully the community can also band together to help the token out!

🍣 For the remainder of we will be working hard on getting everything developed, including; Discord server, Facebook, Instagram, a subreddit, and a youtube channel for informational videos on how to keep your assets safe. We will also be doing some marketing to help get more people on board, during this time period we plan on getting listed on CoinGecko and CMC. We will be exploring different possible use cases in this time period as well. We will be bringing in devs to help with future projects.

🍣 During we will be focused on marketing, and partnerships. We will be exploring many different use cases for our token. We will start looking into ways to promote our token use. We will also be looking for more people to bring onto the team, i.e devs, graphics designers, marketers.

🍣 During we will start development on tools to help flag risky tokens. Also potentially scan contracts that do not comply to best practices. This comes with the beta launch of the Exchange Platform!

🔜 COMING MORE

🍣 TOKENOMICS OF BABY SUSHI 🍣

🍣Total supply: 1.000.000.000.000

🍣 Tax Low


------------------------------------------------

🌟 MC ROAD 🌟

- 20K (Coinsniper Frist Page Boost, Gemhunter First Page Boost , CoinHunt Application) 🟢

- 25K (1 CMS Post Per Hour + 1 Random Hot Trend CMS) 🟢

- 30K (Twitter Influence on our road - Messiah!) 🟢

- 100K (Application & Listing on CoinGecko) 🟢

- 150K (Dextools top 3 Trend) 🟢

- 200K (Poocoin ADS) 🟢

- 250K (Application & Listing on CoinMarketCap) 🟢

- COMING MORE 🔜

-------------------‐------------------------


🌐 Official Links


🌐 Telegram: https://t.me/BaSushiBsc
submitted by GODwOROSEOSTic to CryptoMars [link] [comments]


2021.12.01 02:34 catsandschips plus and minus for GPA?

hey! my hs doesn't use plus or minus for our own GPA calculations but they're still on the transcript. long story short my close to a 4.0 UW would look much more like a 3.6 UW with all those A minuses. when i'm considering my GPA in terms of competitiveness, does this lessen my chance for schools with high median GPAs that i thought i was okay for before?
submitted by catsandschips to ApplyingToCollege [link] [comments]


2021.12.01 02:34 Nohan07 travaux - La future passerelle sur l’A20 se profile

travaux - La future passerelle sur l’A20 se profile submitted by Nohan07 to Limoges [link] [comments]


2021.12.01 02:34 Rantmachine New Ender 3 (Questions/Issue)

Let me start off with that this is not my first 3d printer I had a CR-10S4 that I absolutely HATED it never worked for squat and after 6 months of tinkering and way too much money replacing nearly every part, I cut my losses and sold it to someone that thought they could get it working right.
 
I had intended to save up and get a Prusa Mk3+ the next time I had a project that needed to do more than a few small prints. But the other day MicroCenter ran a deal I could not ignore so I decided to give the Ender 3 Pro a shot.
 
All in all i am SUPER happy with it and out of the box with little to no effort it is already producing 10x better prints than the CR-10 I had ever did. However I am running into an issue where M0 is not pausing the print and I'm wanting to change filament mid print so this is kinda a big deal so I thought id upgrade the firmware.
 
I have the 4.2.2 board and the marlin version is 1.0.1
Creality's site has 2 firmwares for the 4.2.2 board:
1) Ender-3 pro 4.2.2 mainboard firmware(32 bit.zip
2) Ender-3 pro 4.2.2 mainboard--High Temperature Full Hotend Kit firmware.zip
 
Questions:
Did Creality start using full metal hotends in the ender? (I ask because my hotend is all silver and not the normal red I'm accustomed to seeing.)
Is there a way to backup the current firmware to revert back to the stock one if something goes wrong?
Given the 2 firmwares listed above which should I be using?
 
I'm not ready to start compiling my own firmware for it right now because for the most part it is working well and I dont want to screw it up and end up in a situation like I was in with the CR-10. At the same time I know ill eventually give in and want to add a CR Touch and other tweaks but not right now.
submitted by Rantmachine to ender3 [link] [comments]


2021.12.01 02:34 Addictol fighting all logic

fighting all logic submitted by Addictol to IdiotsFightingThings [link] [comments]


2021.12.01 02:34 Vigi-The-Loony It Has Begun: The Stock Market Crash Nobody Believed Was Coming Is Already Upon Us

It Has Begun: The Stock Market Crash Nobody Believed Was Coming Is Already Upon Us submitted by Vigi-The-Loony to Superstonk [link] [comments]


2021.12.01 02:34 Successful-Wind-6511 Ft:Moon Ball LF:Master Ball

submitted by Successful-Wind-6511 to pokemontrades [link] [comments]


2021.12.01 02:34 PrinceofNothing12 Stripper Bard?

I was thinking about ideas for unconventional bards, specifically dancer bards. If a dancer bard had some sort of focus (ankle bells, or some kind of dance silk), then they could very use that in place of an instrument. Similarly, bards also tend to cast through rhyme/spoken word in the form of limericks. That brings me to the title of this post. A stripper (or rather "exotic dancer") bard. One thing I'm wondering about in particular is if clothing can be used as a focus. I'm toying with the idea of having my character use (basically) stripper heels as their focus, gotta commit to the bit and all that. Any advice on creating this kind of character in regards to spell choices and reflavouring?
submitted by PrinceofNothing12 to DnD [link] [comments]


2021.12.01 02:34 acallen4 Orphan. One wish. Two parents dead.

submitted by acallen4 to sixwordstories [link] [comments]


2021.12.01 02:34 hornydog1952 my favourite pantyhose

my favourite pantyhose submitted by hornydog1952 to crossdressing [link] [comments]


2021.12.01 02:34 Supermarshy [FT] Tiansheng is in boxes! [LF] NMTs or 2.0 diys/celeste diy recipes

He is Ungifted as well! Please message me or post here with your offer if you're interested !
submitted by Supermarshy to ACVillager [link] [comments]


2021.12.01 02:34 NewsElfForEnterprise Microsoft shareholders back proposal seeking report on harassment

Microsoft shareholders back proposal seeking report on harassment submitted by NewsElfForEnterprise to News_Microsoft [link] [comments]


2021.12.01 02:34 Practical-Pickle5434 should I get dermals on my cheek bones or my Medusa done

should I get dermals on my cheek bones or my Medusa done submitted by Practical-Pickle5434 to piercing [link] [comments]


2021.12.01 02:34 Wii505 Funny Piper glitch, there are no stairs up there

Funny Piper glitch, there are no stairs up there submitted by Wii505 to softwaregore [link] [comments]


2021.12.01 02:34 i_fuckd_ur_mother What was your "I’m with stupid” moment?

submitted by i_fuckd_ur_mother to AskReddit [link] [comments]


2021.12.01 02:34 SteezyZ4 Watch4Watch

Watch 2 mins and leave a like, I will return all.
https://www.youtube.com/watch?v=dCdmDTurFaE
submitted by SteezyZ4 to Sub4Sub [link] [comments]


2021.12.01 02:34 Demand_Awkward Who here plays MitraSphere?

I have just started playing MitraSphere and was wondering if anyone here plays it and would like to become friends with me in game?
submitted by Demand_Awkward to gachagaming [link] [comments]


2021.12.01 02:34 vikipola Sustainable Living

Sustainable Living submitted by vikipola to newstutorials [link] [comments]


2021.12.01 02:34 DjangoBojangles Liquefaction

Liquefaction submitted by DjangoBojangles to geology [link] [comments]


2021.12.01 02:34 ClarkesBoutaine 18yo Lua Sophia and I PowerSexed on the couch for Monica Lima Full on RED

submitted by ClarkesBoutaine to raiders [link] [comments]


2021.12.01 02:34 Dailuk El babyrage

El babyrage submitted by Dailuk to SkyshockSUB [link] [comments]


http://boofish.ru